Skip to content Skip to footer
What we do

Colors & Species

PLEASE NOTE:
Photos shown here
are very basic representations;
grain and color

will vary.

Call or contact Ware Rite for 4” X 6” representative color samples.
customerservice@warerite.com
​Outside Massachusetts
800-323-9405
Inside Massachusetts
800-323-9401

Colors & Species

PLEASE NOTE: Photos shown here are very basic representations; grain and color will vary.
Driftwood Grey Skies
Driftwood Weathered
Driftwood Sunbleached
Mohogony Natural
Mohogany Brown
Walnut Natural
Walnut Golden Brown
Walnut Brown
Butternut Natural
Butternut Colony
Butternut Brown
Cherry Brown
Cherry Golden Brown
Cherry Natural
Walnut Butcher Block Brown
Worker in helmet and uniform concentrating on his work at machine, he cutting marble in factory
Surfaces for every style.

Edges & Species

East Bridgewater's premier countertop manufacturer.

Ware Rite features six species of wood and six edges in 1 ¼” thickness.  All edges are available on any wood species.  Additional wood species, thicknesses, and custom colors are available on special request.

Call or contact Ware Rite for 4” X 6” representative color samples.

Colors & Species

EasedWalnut Butcher Block
Quarter Round​Walnut
Small Ogee​Butternut
Ogee Cove​Mahogany
Large Ogee​Cherry
Provincial Driftwood

FINISH OPTIONS:

​protect & enhance wood counters.

CLOSED PORE Finish is low maintenance and best suited for wet areas with sinks.

​OPEN PORE FINISH is low maintenance and best suited for non-wet areas.

 

CLOSED PORE  Finish is low maintenance and best suited for wet areas with sinks.

 

The CLOSED PORE Finish is derived from a time-tested, wooden boat-building process.

It starts with a fully saturated, epoxy base coat to seal and fortify the wood fibers followed by rich glazes, and finally, multiple coats of high-tech, catalyzed polyurethane.The result of this ten-step process is unique to the industry; a highly durable finish full of depth and nuance – yet water-proof!  Furthermore, it’s easy to care for – no wax, no polish – just wipe with a soft, clean cloth and mild detergent.

It starts with a fully saturated, epoxy base coat to seal and fortify the wood fibers followed by rich glazes, and finally, multiple coats of high-tech, catalyzed polyurethane.The result of this ten-step process is unique to the industry; a highly durable finish full of depth and nuance – yet water-proof!  Furthermore, it’s easy to care for – no wax, no polish – just wipe with a soft, clean cloth and mild detergent.

 

The OPEN PORE Finish features the same top-coat as Closed Pore and is just as resistant to common household liquids &  (see chart below), however, the Open Pore Finish is

​water-resistant but not water-proof. Clean this finish just as you would the Closed Pore.

According to UNI EN , results are evaluated as follows:​ 

1.  Pronounced marking, film structure is compromised or the film is

     completely or partially removed, or filter paper adheres to the surface.

2.  Pronounced marking, but film structure is unaltered.

3.  Slight marking visible from various angles; for example as a ring.

4.  Slight change in gloss evident only when placed in specific

      lighting, or only on very close examination  with correct lighting.

5. No visible damage or sign. 

Resistance to Common Household Liquids

Resistance to Common Household Liquids

Household Liquid 10 seconds 10 minutes 1 hr. 16 hrs.
Acetone 4 3 2 2
10% Citric Acid 5 5 5 5
48% Ethyl Alcohol 5 3 3 3
10% Ammonia 5 5 5 4
Coffee 5 5 5 5
10% Sodium Chloride 5 5 5 3
Chloride Disinfectant 5 5 5 5
15% Sodium Chloride 5 5 5 5
Olive Oil 5 5 5 5
Liquid Paraffin 5 5 5 5
Red Wine 5 5 5 3